Jablotron Rc 11 Manual
.User instructions of JA-60 „Comfort“ 1. Indicators Alarm alarm triggered by an intruder, smoke, gas etc. Tamper opened cover, damaged detector, excessive number of attempts to enter code etc. Fault power loss, lost communication with a detector etc., (confirm pressing key N) Battery battery of the device specified on the display is low.Optional user functions (following functions can be enabled or disabled in the programming mode): arming without a code - disarming is only possible with an access code (entry of F1 can be used on JA-60D keypad for this function). If the system is split, then this code can be used for arming of section A. Partial (home) arming - detectors addressed to B section will be ignored (except Smoke &.5. Voice dialer programming by user If the control panel is equipped with a 60X telephone dialer module and if enabled in the programming mode during installation, setting of the voice and Pager dialer telephone numbers and messages can be changed in the user mode (with master code).
Jablotron Rc 11 Manual Review
Setting can be performed by entering programming sequences from the keypad while in the control panel user mode (but not from the JA-60D keypad):.5.2. Voice message recording (sequence: 8 0) Press shortly key 8 then press key 0 and hold it pressed while talking into the control panel’s front grid (max. After releasing the 0 key, the message will play back. The message is stored in non-volatile memory and can be changed when ever you want to by repeating the above steps.